A washer that stops mid-cycle may be waiting for water to enter or drain, detecting an unbalanced load, losing power, or seeing a door or lid-lock problem. The exact point where it stops and any error code are more useful than repeatedly restarting the entire cycle.
Note which part of the cycle stops
If the tub remains full, drainage becomes more likely; if it is empty and will not begin washing, check water supply and the door or lid lock. A failure at the same stage each time is more informative than simply saying it stops.
Check the load, door, and accessible water supply
Redistribute bunched items, remove excess load, and make sure the door closes without clothing trapped in it. Confirm that water valves are open and visible hoses are not kinked.
If water remains, check drainage before forcing the door
An accessible clogged filter or kinked drain hose can prevent the machine from reaching spin. Follow the manual for emergency draining and do not force a locked door while water remains inside.
Repeated error codes or a burning smell need service
If the same code returns after basic checks, the motor stops, the breaker trips, or an electrical burning odor appears, stop restarting the washer. Disconnect it from a safe point and arrange professional diagnosis.
Sources
- American Cleaning Institute — Laundry Basics — Laundry practices covering sorting, loading, detergent dosing, and care-label guidance.